Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 4mm thick. Black color, set of 10. 

Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.

Color may slightly vary between products.
 

Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10. 

Alu shims 3x5mm, 1mm thick which can be used for various purposes including roll center adjustment.  

Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10. 

Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.  

Alu shims 3x5mm, 4mm thick which can be used for various purposes.  

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour. 

Gear differential cross pin made from tough composite material. 

Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  

Alu mount, CNC-machined, for mounting steering servo. Black color. 

Alu chassis made from custom-produced 2.5mm Swiss 7075 T6 aluminum.  

The chassis features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrower. 

High-quality CNC-machined front wing holder made from premium graphite material. Complete set including shims and mounting hardware.  

Aluminum front lower arm mount 23°/29° kick-up brace made from high-quality Swiss 7075 T6 aluminum.  

HARD composite front roll-center holder. The holder absorbs less bumps than medium (but more than alu), and is more reactive than medium composite (but less than alu). 

MEDIUM-hardness composite front roll-center holder. The holder generates more traction, absorbs bumps better. 

Alu front roll-center holder with wider design and roll center positions moved more outside increases strength, reliability and makes the handling more precise and more forgiving 

CNC-machined front shock tower made from 3.0mm thick premium-grade graphite material for incredible strength and long lifespan. 

CNC-machined alu front shock tower from 3mm thick premium Swiss 7075 T6 aluminum.  

Front lower suspension arm made from specially-formulated graphite composite material.  

HARD front lower suspension arm made from super-tough high-tech composite material.  

MEDIUM-hardness front lower suspension arm made from high-tech composite material.
 

Front lower RIGHT suspension arm made from specially-formulated graphite composite material.  

Front lower LEFT suspension arm made from specially-formulated graphite composite material.  

GRAPHITE molded composite C-hub for LEFT steering block. The specially-formulated graphite composite material is a perfect balance between reliability and performance.  

MEDIUM-hardness molded composite LEFT C-hub, suitable for most track conditions especially for very-low-, low- and medium-traction tracks. Absorbs bumps better, easy to drive. Use with right C-hub #322210-M. 

Molded composite steering block from specially-formulated graphite composite material is a perfect balance between reliability and performance.  

MEDIUM-hardness molded composite steering block is tiny yet tough, includes graphite Ackermann extension for variable Ackermann positions. Generates more steering, more aggressive handling of the car. 

Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 

Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 

Steering block graphite extension, works on either left or right side. 

Optional aluminum lower arm mount has an integrated 26° kick-up angle. The alu arm mount makes the car more stable and increases on-power steering. 

Optional brass lower arm mount has an integrated 26° kick-up angle.  

Optional aluminum kick-up mount with integrated 23° and 29° kick-up angle. The alu arm mount makes the car more stable and increases on-power steering. 

Optional brass kick-up mount with integrated 23° and 29° kick-up angle. 

Composite steering arm made from strong, lightweight composite material makes the car easy to drive and more forgiving. The composite arm better absorbs energy in crashes.  

Composite steering plate made from strong, lightweight composite material makes the car easy to drive and more forgiving with less steering. Better energy absorption in in crashes. 

Alu steering plate for rearward linkage mounting allows mounting the steering linkages more rearwards which makes the steering more precise and makes the car more predictable and results in smoother feeling.  

Molded composite motor gear box made from specially-formulated graphite composite material to fit REAR motor position of XB2 

Molded composite LONG gear box made from premium composite material to fit FRONT motor position of XB2.  

Molded composite motor gear box made from specially-formulated graphite composite material to fit FRONT motor position of XB2 

Molded rear roll-center holder made from GRAPHITE composite material 

CNC-machined rear shock tower made from 4.0mm thick premium-grade graphite material for incredible strength and long lifespan. 

Rear lower RIGHT suspension arm redesigned to move arm maximum forward. 

Rear lower LEFT suspension arm redesigned to move arm maximum forward. 

Super-compact rear upright made from specially-formulated graphite composite material features multiple set-up options for upper & lower roll centers. 

Super-compact rear upright, CNC-machined from high-grade Swiss 7075 T6 aluminum, featuring multiple set-up options for upper & lower roll centers. 

Alu rear hub plate for multi-adjustable rear upright #323355. CNC-machined from high-grade Swiss 7075 T6 aluminum. 

Rear anti-roll bar set 1.0mm for XB2 made from special spring steel material. Stabilizes rear of the car. Roll bars are easily mounted to the gearbox and can be adjusted with linkages. 

Stylish, effective REAR wing designed to work perfectly with the original XRAY XB2 body.  

Optional REAR wing for XB2 made from thick Lexan material is highly reliable with less chance of breakage, gives higher traction & stability, but reduces steering. 

Stylish, effective FRONT wing designed to work perfectly with the original XRAY XB2 body on carpet and dirt. Increases steering and stability on jumps. 

Stylish, effective rear center fin was developed and long term tested to maximize the rear wing air flow efficiency.  

Stylish, effective wider front wing works perfectly with XRAY XB2 body and increases front down force.
 

Stylish, effective rear wing works perfectly with XRAY XB2 body. 

XRAY XB2 Slipper Eliminator is a direct replacement for the slipper clutch set. Compatible with LCG gearboxes, reducing the number of parts needed to change between configurations. 

Super-lightweight long 3-pad top shaft 20T made from premium Swiss 7075 T6 alu. Fits LCG gear box. 

Slipper clutch plate machined from premium Swiss 7075 T6 alu. Additionally hardened, and with a black final surface treatment. 

Slipper Eliminator spacer machined from premium Swiss 7075 T6 aluminum. 

Slipper clutch plate with adapter machined from premium Swiss 7075 T6 alu.  

Slipper clutch shim machined from premium Swiss 7075 T6 alu. Additionally hardened, and with a black final surface treatment. 

Molded 38T gear made from specially-formulated graphite composite material gives the perfect balance between reliability and performance. Fits LCG gear box. 

Set of LCG Gear Differential. The differential has greater internal volume for more oil to increase consistency of the diff action, yet at the same time it is significantly narrower to fit into the LCG gear box and to move the rotating weight closer to the centerline. 

Gear differential cover made from tough composite material. Fits LCG gear box. 

Gear differential case made from tough composite material. Fits LCG gear box. 

CNC-machined gear diff outdrive adaptors designed to use with drive shafts with 2.5mm pin and to fit the LCG gear box. 

Sealing gasket for differential housing. Set of 4. 

CNC-machined CVD rear drive shaft (75mm) with 2.5mm pin, made from world-renowned HUDY Spring Steel™.  

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.
 

Alu shims 10x12 mm size, 2mm thick. Set of 2. 

XRAY precision-molded offset spur gear 69 tooth, 48 pitch for Slipper Eliminator. This spur gear has been strategically lightened to reduce rotating mass. 

XRAY precision-molded offset spur gear 72 tooth, 48 pitch for Slipper Eliminator. This spur gear has been strategically lightened to reduce rotating mass. 

Specially-designed 35g stainless steel weight for placement beneath short battery pack to add weight as low as possible. 

Optional stainless steel 17g weight for front of the XB2 cars.  

Optional stainless steel 17g weight for front-middle of the XB2 cars.  

Optional stainless steel 7g weight for middle of the XB2 cars.  

Molded composite shock ball joint, length 21mm. These ball joints are +4mm longer than standard ball joints, allowing greater suspension downtravel.  

High-performance, low-profile aerodynamic body for XB2 designed by XRAY to perfectly fit the car. Used by the Factory Team in medium to high-traction conditions.  

High-performance, low-profile aerodynamic body for XB2 designed by XRAY to perfectly fit the car and work in most track conditions.  

Completely redesigned, high-performance, low-profile Beta 2 body with super-smooth airflow and all-new downforce areas.  

The optional ultra-lightweight, completely redesigned, high-performance, low-profile Beta 2 body with super-smooth airflow and all-new downforce areas. 

High-performance, low-profile aerodynamic body for XB2 designed by XRAY to perfectly fit the car and work in most track conditions.  

Molded composite 5.8 ball joints for steering & servo linkages. Includes 4 long and 2 short ball joints. 

Differential gears for gear differentials are made from pressed steel, heat treated, and machined for ultra-precision and smooth operation. Includes 2 bevel and 4 satellite gears. 

Polished steel pins for gear differential. Set of 2. 

Alu hardcoated pins for NT1 gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2. 

High-performance clutchbell oversized ball-bearings designed and engineered by XRAY. Set of 2. 

Alu conical shim 3x6x2.0mm. Black color. Set of 10. 

Alu conical shim 3x6x2.0mm. Orange color. Set of 10. 

Spring steel anti-roll bar, 1.0mm thick. Marked with no laser-engraved lines for easy identification. Black colour.
 

Spring steel anti-roll bar, 1.1mm thick. Marked with 1 laser-engraved line for easy identification. Black colour.
 

Spring steel anti-roll bar, 1.2mm thick. Marked with 2 laser-engraved lines for easy identification. Black colour. 

Spring steel anti-roll bar, 1.3mm thick. Marked with 3 laser-engraved lines for easy identification. Black colour.
 

Threaded 4.9mm ball end with 5mm thread length for connection to molded ball joints. Set of 2. 

Rear lower RIGHT suspension arm made from specially-formulated graphite composite mixture, perfect for high-traction conditions. 

HARD rear lower RIGHT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performance.  

Completely redesigned rear long suspension arm is 2mm longer 

Rear lower LEFT suspension arm made from specially-formulated graphite composite mixture, perfect for high-traction conditions.  

HARD rear lower LEFT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performance. 

Completely redesigned rear long suspension arm is 2mm longer 

Slipper clutch plate disc designed for 3-pad slipper is CNC machined from premium Swiss 7075 T6 with a black final surface treatment. 

Clutch spring for slipper clutch. 

CNC-machined, premium aircraft aluminum 14mm wheel hubs.  

CNC-machined, premium aircraft aluminum -0.75mm offset wheel hubs, to give narrower track-width.  

CNC-machined, premium aircraft aluminum +0.75mm offset wheel hubs, to give wider track-width.  

CNC-machined, premium aircraft aluminum 12mm wheel hubs. Strategically machined for optimum strength, balance, and lightness.  

CNC-machined, premium aircraft aluminum 12mm wheel hubs with -0.75mm offset for narrower track-width. Strategically machined for optimum strength, balance, and lightness.  

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +0.75mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +1.50mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +3.00mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined 12mm wheel hubs with +3.75mm offset for wider track-width, made from Swiss 7075 T6.  

CNC-machined 12mm wheel hubs made from Swiss 7075 T6 have +4.5mm offset for wider track-width.  

High-strength pinion 18T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion 25T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 75T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.  

Precision-molded spur gear 81T is made from XRAY's exclusive secret blend of composite material, allowing the gear to run yet be robust enough to handle high performance brushless motors. 

Precision-molded spur gear 84T is made from XRAY's exclusive secret blend of composite material, allowing the gear to run yet be robust enough to handle high performance brushless motors. 

Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 87T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.  

Set of lower aluminum shock collars for increased reliability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Black color. 

Set of lower aluminum shock collars for increased reliability. 

Set of shock pistons made from Delrin and molded using super precise moulds. 

Machined steel upper mounting bushing for XB4 alu shock cap. Set of 2. 

Machined aluminum upper shock cap for XB4 shock absorbers. Optional alu upper shock cap offer an increased durability and extended life time.  

Rubber shim for XB4 alu shock cap. Set of 4. 

Machined alu front shock bodies. Shorter than standard shock bodies to match lower front shock tower. 

Shorter hardened, high-strength front shock shaft. Polished for super-smooth operation.  

Front progressive springs specifically designed for use with big bore shocks. Set of 2.
 

Optional springs specifically designed to complement the big-bore shocks.  

The springs have been specifically designed to complement the big bore shocks. 

The springs have been specifically designed to complement the big bore shocks. Set of 2. 

New optional FRONT linear springs are recommended for high-traction tracks. T 

FRONT linear springs have been specifically designed to complement the big-bore shocks. 

FRONT linear springs have been specifically designed to complement the big-bore shocks.  

FRONT linear springs have been specifically designed to complement the big-bore shocks.  

FRONT linear springs have been specifically designed to complement the big-bore shocks.  

FRONT linear springs have been specifically designed to complement the big-bore shocks. 

The springs have been specifically designed to complement the big bore shocks. Set of 2.

 

Rear progressive springs specifically designed for use with big bore shocks. Set of 2.
 

Optional springs specifically designed to complement the big-bore shocks.  

The springs have been specifically designed to complement the big bore shocks.  

The springs have been specifically designed to complement the big bore shocks. Set of 2. 

New optional REAR linear springs are recommended for high-traction tracks.  

REAR linear springs have been specifically designed to complement the big-bore shocks.  

REAR linear springs have been specifically designed to complement the big-bore shocks. 

REAR linear springs have been specifically designed to complement the big-bore shocks. 

Molded composite servo saver set - extra stiff.  

M3x3 setscrew, hex drive. Set of 10 pieces. 

M3x10 setscrew, hex drive. Set of 10 pieces. 

M2.5x8 button-head machine screw, hex drive. 

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces.
 

New high-speed ball-bearings manufactured specially for XRAY.  

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Set of 2 pieces. 

M3 alu locking nuts. Set of 10. 

Flat washer. ID x OD x thickness = 3mm x 6mm x 0.2mm. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 10mm x 12mm x 0.1mm. Set of 10. 

Flat washer. ID x OD x thickness = 3.5mm x 10mm x 0.2mm. Set of 10 pieces.  

Flat washer. ID x OD x thickness = 5mm x 15mm x 0.3mm. Set of 10 pieces.  

Silicone O-ring fits over 5mm shaft. 1.5mm thick. Set of 10 pieces. 

Silicone O-ring fits over 3mm shaft. 2mm thick. Set of 10 pieces.  

Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins.  

Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.